Browse Categories

Search in Category

Rear Blades for 3-Point Hitch by Worksaver

Filter Your Search

Shop by Category

Loading...

Rear Blades for 3-Point Hitch by Worksaver

Landscaping/Blades for Grading/Leveling/Rear Blades for 3-Point Hitch by Worksaver 
Viewing Page 1 of 1 (7 results)

RB-1284 Standard-Duty Rear Blade

Item # WOR 346715
Manufacturer: Worksaver

7' Standard-Duty Rear Blade for 3-Point Hitch. CAT I (7/8” Pins), Quick Hitch Compatible. Moldboard Height is 12” 1/2” x 6” Cutting Edge. For Tractors up to 40 HP
UOM : EA

MCRB-27 Economy Rear Blade

Item # WOR 346775
Manufacturer: Worksaver

6' Economy Rear Blade for 3-Point Hitch CAT I with 7/8” Pins. Moldboard Height is 12” with Reversible 6” Cutting Edge. For Tractors up to 35 HP
UOM : EA

RBHD-6 Utility Rear Blade with Offset

Item # WOR 346780
Manufacturer: Worksaver

6' Utility Rear Blade with Offset for 3-Point Hitch. CAT I (7/8” Pins), Quick Hitch Compatible. Moldboard Height 14” Bolt-on 1/2” x 6” Cutting Edge. For Tractors up to 50 HP
UOM : EA

RBHD-7 7' Utility Rear Blade with Offset

Item # WOR 346785
Manufacturer: Worksaver

7' Utility Rear Blade with Offset for 3-Point Hitch. CAT I (7/8” Pins), Quick Hitch Compatible. Moldboard Height 14” Bolt-on 1/2” x 6” Cutting Edge. For Tractors up to 50 HP
UOM : EA

RBHD-6-T Utility Rear Blade with Offset & Tilt

Item # WOR 346790
Manufacturer: Worksaver

6' Utility Rear Blade with Offset / Tilt for 3-Point Hitch. CAT I (7/8” Pins), Quick Hitch Compatible. Moldboard Height 14” Bolt-on 1/2” x 6” Cutting Edge. For Tractors up to 50 HP
UOM : EA

RBHD-7 Utility Rear Blade with Offset & Tilt

Item # WOR 346795
Manufacturer: Worksaver

7' Utility Rear Blade with Offset / Tilt for 3-Point Hitch. CAT I (7/8” Pins), Quick Hitch Compatible. Moldboard Height 14” Bolt-on 1/2” x 6” Cutting Edge. For Tractors up to 50 HP
UOM : EA

RB-1272 Standard-Duty Rear Blade

Item # WOR 346705
Manufacturer: Worksaver

6' Standard-Duty Rear Blade for 3-Point Hitch. CAT I (7/8” Pins), Quick Hitch Compatible. Moldboard Height is 12” 1/2” x 6” Cutting Edge. For Tractors up to 40 HP
UOM : EA